• Frame Material

  The frame of the clean room is usually made of industrial aluminum profiles, stainless steel squares or sprayed iron squares. These materials have good strength and stability, can withstand a certain pressure and weight, and at the same time has the characteristics of not rusting, not producing dust, to ensure the overall structural stability and cleanliness of the clean shed.

• Anti-static curtain

  The anti-static drape material commonly used around the clean shed is 0.3mm thick grid, with good anti-static effect and high transparency. This material is clear, flexible, not easy to deform and aging, can effectively isolate the external dust and reduce the accumulation of static electricity, suitable for the need to dust in addition to the environment of static electricity.

• Top cover plate and purification lamp

  The roof plate of the clean room is usually made of cold rolled steel plate with electrostatic spraying treatment, which has good anti-corrosion and wear-resistant performance. The internal purification lamp is specially designed for the clean room lighting equipment, with dust removal, sterilization, disinfection and other multiple functions, while energy saving and environmental protection, suitable for long time continuous use, to ensure the cleanliness of the clean room interior.

• FFU Fan Filtration Unit

  Fan Filtration Unit (FFU) is an important part of the clean room, which adopts centrifugal fan with the features of long life, low noise, maintenance-free, low vibration, stepless speed change, etc. The high filtration efficiency of the FFU can effectively capture and filter out the particles in the air to ensure the purity of the air inside the clean room.

• Scope of application

  The clean shed is suitable for occasions that require a localized high cleanliness environment, such as the assembly of electronic products, the manufacture of precision instruments, the production of pharmaceuticals and aseptic operations. It can be used individually or multiple connections can be made to form a strip clean area to suit different production needs.

• Advantages and Challenges

  The advantages of clean booths are their quick erection, ease of movement and maintenance, and precision control of the environment. However, the challenges of construction and management are the high initial investment and specialized maintenance teams required. In addition, as technology evolves, clean booths are constantly moving towards higher cleanliness and lower energy consumption.

Preparation before installation

Before installing a clean shed, it is first necessary to ensure that the environmental conditions of the installation site, such as dry, ventilated, well-lit, etc., and meet the additional requirements of the specific industry, such as anti-static and anti-corrosion. At the same time, it is necessary to establish user profiles and make regular follow-up visits to the quality and use of the product.

Installation steps

• Foundation construction: Make sure the foundation construction meets the design requirements, the foundation is level, solid and horizontal, and passes the acceptance before continuing.

• Frame Installation: Use section steel to make the frame and ensure its verticality and horizontality, and carry out anti-corrosion and anti-rust treatment after the installation is completed.

• Roof and wall plate installation: use purification board and other materials to ensure the flatness of the roof and wall plate and the tightness of the joints to avoid loopholes.

• Air purification system installation: The interior should be equipped with an air purification system, including high-efficiency filters, air showers, ultraviolet disinfection lamps, etc., and ensure that the connections between the components are tight to prevent air leakage.

• Lighting system installation: Installation of lighting system, such as LED lamps and lanterns, to ensure the waterproof and dustproof performance of the lamps and lanterns and the uniformity of illumination.

• Electrical system installation: the electrical system needs to comply with national standards and industry requirements to ensure stable and safe power supply and normal operation of equipment.

• Grounding treatment: grounding treatment should meet the design requirements to ensure the safe operation of the equipment.

• Acceptance and debugging: acceptance after the installation is completed to ensure that the systems operate normally and achieve the expected clean effect.

• Temperature Measurement Standards

  Temperature is an important factor affecting the environment inside the clean room. When testing, a high-precision thermometer should be used, and care should be taken to place the thermometer in an appropriate location to avoid the influence of external heat sources. At the same time, in order to improve the accuracy of the measurement, it should be measured several times to take the average value.

• Humidity measurement standard

  Stability of humidity is particularly important for certain sensitive production processes. When using a high-precision hygrometer, you need to pay attention to its placement to avoid being affected by the surrounding environment. Similarly, averaging multiple measurements can be an effective way to improve the accuracy of the measurement.

• Noise Measurement Standards

  Noise levels can affect staff comfort and production accuracy. When using a sound level meter, measurements should be taken in a variety of environments and averaged over a number of times to ensure the accuracy of the data.

• Wind speed measurement standard

  Wind speed is a key parameter to ensure the stability of airflow in a clean shed. When using an anemometer, a suitable location should be chosen for measurement to avoid local airflow interference. Taking the average value of multiple measurements is also applicable to the detection of wind speed.

• Air quality measurement standard

  Air quality is directly related to the cleanliness of the clean room. When using air quality testing instruments, attention should be paid to choosing appropriate sampling points and taking the average value of multiple measurements in order to obtain accurate air quality data.

• Illumination Measurement Standards

  Adequate and uniform light is critical for visual operations in cleanrooms. When using a light level meter, attention should be paid to where it is placed to avoid interference from outside light sources. The same method of averaging multiple measurements applies.