Special requirements for materials used in the construction of clean booths

• Anti-pollution: the material must have good anti-pollution properties, not easy to adsorb dust and microorganisms to maintain the cleanliness of the internal environment.

• Easy to clean: the surface should be smooth and without gaps to facilitate daily cleaning and disinfection work and prevent pollutants from hiding.

• Chemical stability: the material should be able to resist the erosion of commonly used disinfectants and cleaning agents, maintaining the stability of physical and chemical properties.

• Dust-free: In the manufacturing and installation process, the material itself should produce the least amount of dust possible to avoid contaminating the clean environment.

• Non-fiber shedding: the material shall not contain easy to shed fibers to prevent these fibers become airborne particulate contaminants.

• Corrosion resistance: According to the characteristics of the environment in which the clean shed is located, the material should have a certain degree of corrosion resistance to adapt to the possible presence of chemical substances.

• Structural strength: Although the material needs to meet the special requirements mentioned above, it is still necessary to ensure sufficient structural strength to support the weight of the clean room and the ability to withstand external forces.

• Compliance with regulations and standards: All materials should be selected in accordance with national or international regulations and standards for cleanroom construction.

• Operating Rooms: When performing high-precision surgeries such as aseptic surgeries or organ transplants, clean booths can provide a dust-free and sterile environment to reduce the risk of post-operative infections.

• Laboratories: In biosafety labs, molecular biology labs and drug discovery labs, clean booths are used to protect experimental samples from external contaminants and ensure the accuracy of experimental data.

• Isolation Ward: For immunodeficient patients or cancer patients undergoing chemotherapy, clean sheds can be used as isolation wards to reduce the invasion of external pathogens and improve the success rate of treatment.

• Food Processing: In the food production process, clean rooms help to maintain the cleanliness and safety of food products, preventing microbial contamination and safeguarding the health of consumers.

• Pharmaceutical Manufacturing: In pharmaceutical manufacturing, clean rooms are used to control airborne particulate and microbial levels, ensuring that the quality of pharmaceuticals meets strict industry standards.

• Hospital clean zones: In clean zones of hospitals, such as intensive care units (ICU) and neonatal intensive care units (NICU), clean sheds are used to maintain indoor air quality and reduce the rate of nosocomial infections.

• Research & Development: In the research and development phase of new materials, drugs or medical devices, clean rooms provide a controlled environment that facilitates scientists to conduct precise experiments and tests.

• Installation location: The clean shed should be installed in a dry, ventilated, well-lit environment, avoiding direct sunlight. The installation location should also meet the special requirements of the relevant industries, such as anti-static, anti-corrosion and so on.

• Foundation construction: clean shed foundation construction should meet the design requirements to ensure that the foundation is flat, solid, level. After the foundation construction, acceptance should be carried out, qualified before the installation of clean shed.

• Frame Installation: The frame of clean shed is made of steel, and the verticality and horizontality of the frame should be ensured during installation. After the installation of the frame is completed, anti-corrosion and anti-rust treatment should be carried out.

• Roof and wall plate installation: the roof and wall plate should be used to purify the board or other materials in line with the clean requirements. When installing, it should ensure the flatness of the roof and wall plate, and tightness of the joints to avoid loopholes.

• Installation of air purification system: The interior of the clean shed should be equipped with an air purification system, including high-efficiency filters, air showers, ultraviolet disinfection lamps and so on. When installing, it should be ensured that the connection between each component is tight to avoid air leakage.

• Lighting system installation: the clean room should be equipped with lighting system, including LED lamps and lanterns. When installing, the waterproof and dustproof performance of the lamps and lanterns, as well as the uniformity of illumination should be ensured.

• Electrical system installation: the electrical system of the clean room should comply with the relevant national standards and industry requirements. Installation should ensure that the power supply is stable, safe, and the normal operation of the electrical equipment.

• Grounding: The grounding of the clean shed should meet the design requirements to ensure the safe operation of the equipment inside the clean shed.

• Acceptance and debugging: clean shed installation is completed, acceptance should be carried out. After acceptance, the clean shed debugging to ensure that the normal operation of the system to achieve the desired clean effect.

Monitoring and controlling humidity

• Installation of humidity sensors: Deploy highly accurate humidity sensors in the cleanroom to monitor air humidity levels in real time.

• Use humidifiers or dehumidifiers: Based on the monitoring data, use humidifiers to increase humidity if the humidity level is lower than the set standard; conversely, use dehumidifiers to decrease the humidity level.

• Automated control systems: Integrated automated control systems automatically adjust humidification or dehumidification equipment based on preset humidity thresholds to maintain constant humidity levels.

Monitoring and controlling temperature

• Install temperature sensors: Again, install temperature sensors to monitor temperature changes within the cleanroom.

• Use of Heating or Cooling Equipment: Based on feedback from temperature sensors, a heater or air conditioning system is used to adjust the temperature to ensure it is within specified limits.

• Automatic control system: Similar to humidity control, temperature should be managed through an automatic control system for precise temperature control.

Regular Calibration and Maintenance

• Regular Calibration of Sensors: Ensure the accuracy of all monitoring equipment by eliminating errors through regular calibration.

• Maintain control equipment: Regularly inspect and maintain humidifiers, dehumidifiers, heaters and cooling systems to ensure they are operating efficiently and reliably.

Recording and Adjustment

• Record environmental data: Continuously record humidity and temperature data to analyze trends and make timely adjustments to control strategies.

• Adjusting control parameters: Adjust the control parameters at the right time according to the historical data and actual situation to achieve the optimal environmental control effect.