Laboratory iso5 Clean Room

In electronic laboratories, clean sheds are often used in the following aspects:

Semiconductor manufacturing: In the processing and manufacturing process of semiconductor materials, the cleanliness requirements are extremely high, and clean sheds can effectively prevent the interference of dust and pollutants.

Electronic component assembly: When assembling sensitive electronic components, clean sheds provide a safe and low-pollution environment, which helps to improve the product qualification rate.

Experiments and tests: When conducting electronic experiments and tests, clean sheds can ensure the cleanliness of the experimental environment and avoid the influence of external factors on the experimental results.

As an important clean equipment in electronic laboratories, clean work sheds not only provide efficient air purification solutions, but also provide strong support for the development of the electronics industry with its flexibility and cost-effectiveness. Through the rational use of clean sheds, electronic laboratories can improve work efficiency while ensuring product quality and adapt to rapidly changing market demands.

Overview：

Class iso5 clean room is a kind of local environment that can provide cleanliness of Class iso5, which is achieved by technical means such as high-efficiency air filtration and airflow control. Class iso5 clean room usually adopts modular design, which can be assembled and expanded according to actual needs, and has high flexibility and customizability.

Class iso5 clean room in laboratory is an air purification equipment that provides a local high clean environment. It is mainly composed of box, fan, primary air filter, damping layer and lamps, and the shell is sprayed. The product can be hung or supported on the ground, with compact structure and convenient use. It can be used alone or connected to form a strip-shaped clean area.

Features：

• The modular assembly structure design can easily improve the purification level and is easy to install.

• Equipped with universal wheels, it is easy to move.

• The Class iso5 clean shed has a larger effective working space than the clean workbench; it has fast construction and low cost compared to the clean workshop.

• LED display, electronic board control; touch-type micro switch, using an adjustable air volume system to ensure that the wind speed in the work area is in an ideal state.

• Applicable to clean production lines.

Install：

In the design and use of the Class 100 clean shed in the laboratory, the following aspects should be noted:

Installation location: The clean shed should be installed in a dry, ventilated, well-lit environment to avoid direct sunlight. The installation location must also meet the special requirements of related industries, such as anti-static and anti-corrosion.

Foundation construction: The foundation construction of the clean shed should meet the design requirements to ensure that the foundation is flat, solid and horizontal. After the foundation construction, it should be inspected and accepted, and the clean shed can be installed only after it is qualified.

Frame installation: The clean shed frame is made of steel, and the verticality and horizontality of the frame should be ensured during installation. After the frame is installed, anti-corrosion and anti-rust treatment should be carried out.

Ceiling and wall panel installation: The ceiling and wall panels should be made of purification panels or other materials that meet the clean requirements. During installation, the flatness and joints of the ceiling and wall panels should be ensured to avoid loopholes.

Air purification system installation: The clean shed should be equipped with an air purification system, including high-efficiency filters, air showers, ultraviolet disinfection lamps, etc. During installation, ensure that the connections between the components are tight to avoid air leakage.

Lighting system installation: The clean room should be equipped with a lighting system, including LED lamps, etc. During installation, the waterproof and dustproof performance of the lamps and the uniformity of illumination should be ensured.

Electrical system installation: The electrical system of the clean room should comply with relevant national standards and industry requirements. During installation, the power supply should be stable and safe, and the normal operation of each electrical equipment should be ensured.

Grounding treatment: The grounding treatment of the clean room should meet the design requirements to ensure the safe operation of the equipment inside the clean room.

Acceptance and commissioning: After the installation of the clean room is completed, acceptance should be carried out. After the acceptance is qualified, the clean room should be debugged to ensure the normal operation of each system and achieve the expected clean effect.