High efficiency and low resistance: the high efficiency filter without partition can effectively filter tiny particles in the air, including bacteria, viruses and other microorganisms, as well as harmful gases, and improve indoor air quality.

Light weight and thin thickness: the structural design of the non-spacer high-efficiency filter makes it lighter in weight and thinner in thickness, occupies less space and is easy to install.

Easy installation and low operating costs: The design of the HEPA filters allows them to be installed in a wide range of environments with relatively low operating costs, as they typically have a long service life.

High filtration efficiency: Compartmentless HEPA filters typically have high filtration efficiencies, capable of capturing airborne particles below 0.3 microns, such as HEPA filters with filtration efficiencies of 99.99% or higher.

Variety of filter media materials: The filter media of non-compartmentalized high-efficiency filters are made of various materials, including ultra-fine glass fiber filter paper, synthetic fiber filter paper, etc. These materials have good filtration effect and durability.

Application Fields

Separatorless high-efficiency filters are mainly used to capture particles of dust and various suspended matters below 0.5um, and are widely used in electronics, medicine, food, semiconductor manufacturing, atomic force research, precision machinery, cosmetics and other occasions with high cleanliness requirements. Especially in hospital operating rooms, pharmaceutical factories, microelectronics factories and other places, the role of high efficiency filter without partition is particularly important, which can effectively control the particles in the air to ensure the cleanliness of the air, thus guaranteeing the success rate of surgery and product quality.

Safe Operation and Maintenance Regulations

When using the non-septum high-efficiency filter, the relevant safety operation regulations must be strictly observed. Before operation, check whether the equipment is intact, confirm that the power supply and air volume are set correctly, and pay attention to the running status of the equipment at any time during operation to avoid equipment damage or safety accidents caused by improper operation. In addition, regular cleaning and replacement of the filter is also the key to ensure its long-term effective operation.

Filtration Efficiency: Separatorless HEPA filters are able to filter out airborne particles above 0.3μm and reach the filtration efficiency of H13 and H14 level (EN1822).

Filter media material: The filter media is usually made of ultra-fine glass fiber filter paper, which can provide good filtration effect.

Separator: Separatorless HEPA filters use hot melt adhesive as separator, this design helps to reduce the running cost and ensure the same pleat layer spacing, which improves the airflow through efficiency.

Frame material: The outer frame is made of anodized aluminum alloy, which has good corrosion resistance and strength.

Sealing: The filter is sealed around the perimeter with a special hermetic sealant to ensure the sealing of the entire filter.

Protective measures: A plastic-sprayed protective net is added to the inlet and outlet surfaces of the filter to protect the filter paper from being damaged.

Test verification: Each filter has been strictly tested to ensure that its performance meets the requirements.

Environmental adaptability: The non-spacer high-efficiency filter can work normally in an environment where the relative humidity does not exceed 100% RH and the temperature does not exceed 80℃.

Service life: the service life of the non-separator high-efficiency filter is long and can meet the needs of long-term use.

Convenient installation: the design of the septum-free high-efficiency filter is easy to install and replace, and is suitable for use in different occasions.