Stainless steel air shower room configuration structure

• Top cover

• Door closer

• Suction cup lock

• Lighting

• Control panel

• Emergency switch

• Stainless steel door

• Stainless steel nozzle

• High efficiency filter

• Box

• Primary filter

• Specialized fan

• Stainless steel chassis

Air Shower Room Operation Steps

Preparation Before Entry:

• Ensure you are wearing appropriate cleanroom attire (e.g., gown, gloves, mask, hairnet).

• Remove any items that should not enter the cleanroom (e.g., personal items, bags).

• Check that the air shower room is clean and functioning properly.

Entering the Air Shower:

• Open the door to the air shower room (ensure the outer door closes securely behind you).

• Step inside the air shower chamber and make sure the door closes completely.

Activating the Air Shower:

• Press the button or activate the sensor to start the air shower. This may vary depending on the model of the air shower.

• Stay still and allow the high-velocity air jets to operate for the recommended duration (usually 10-30 seconds).

During the Shower:

• Keep your arms and body positioned to allow air to circulate around you effectively.

• Ensure that the air jets are directed at all areas of your clothing and body.

• Avoid moving excessively, as this can disrupt the airflow and reduce the effectiveness of the air shower.

Completing the Air Shower:

• Wait for the air shower cycle to complete. You may hear a timer or see a light indicator.

• After the cycle ends, the air shower will automatically turn off or prompt you to exit.

Exiting the Air Shower:

• Open the inner door of the air shower room after confirming it is safe (the outer door should remain closed).

• Step out into the cleanroom area, ensuring you do not touch surfaces until fully inside.

Post-Entry Protocol:

• Follow any additional cleanroom protocols (e.g., hand sanitization, equipment checks).

• If you notice any contamination or issues with the air shower, report it to the facility manager or cleanroom supervisor.

1. How do you measure the effectiveness of an air shower?

The effectiveness of an air shower can be measured by assessing particle removal efficiency and airflow dynamics. This typically involves using particle counters to quantify the number of airborne contaminants before and after the air shower is activated, as well as evaluating the uniformity and speed of airflow within the chamber. Regular maintenance and calibration of measuring instruments are essential for accurate results.

2. How do you clean the interior of an air shower?

To clean the interior of an air shower, first, turn off the unit and disconnect it from power. Use a soft cloth or non-abrasive cleaner to wipe down the surfaces, ensuring that you reach corners and crevices where dust may accumulate. After cleaning, inspect and replace any filters as necessary to maintain optimal performance.

3. What are the dimensions of a typical air shower?

A typical air shower has dimensions that can vary widely, but they often range from about 3 to 7 feet in height, 3 to 5 feet in width, and 3 to 5 feet in depth. These dimensions accommodate a single user and allow for effective airflow and particle removal. Custom sizes are also available to meet specific facility needs.

• Height: 6 to 7 feet

• Width: 3 to 5 feet

• Depth: 3 to 5 feet

4. How do you choose the right air shower for your needs?

Choosing the right air shower involves considering factors such as the intended application, the required air cleanliness level, and the space available. Evaluate the airflow speed, the number of nozzles, and the filter types to ensure they meet your operational requirements. Additionally, consider the ease of maintenance and energy efficiency to ensure long-term usability.

5. What are the specifications for a double blower air shower?

A double blower air shower is typically designed with two high-efficiency blowers that provide enhanced airflow and uniformity. Specifications may include airflow rates of 30-50 feet per minute, multiple HEPA filters for particle removal, and adjustable speed settings. The construction often includes stainless steel for durability and ease of cleaning.

6. What materials are air showers typically made from?

Air showers are commonly constructed from materials like stainless steel, aluminum, or high-density polyethylene. Stainless steel is favored for its durability and resistance to corrosion, while aluminum is lightweight and easy to clean. These materials help maintain hygiene and withstand the rigors of frequent use in controlled environments.

7. What is the airflow speed in an air shower?

The airflow speed in an air shower usually ranges from 20 to 30 feet per minute. This speed is crucial for effectively dislodging and removing particles from the surface of a person or object entering the cleanroom environment. The airflow design ensures that contaminants are efficiently blown away, enhancing cleanliness.

8. How much does a double blower air shower cost?

The cost of a double blower air shower can vary significantly based on features and specifications, typically ranging from $5,000 to $15,000. Factors influencing the price include the materials used, design complexity, and additional features such as control systems and filtration capabilities.

• Materials used

• Design complexity

• Additional features (e.g., control systems, filtration)

9. How do you replace an air shower filter?

To replace an air shower filter, first, turn off and unplug the unit for safety. Open the access panel to locate the filter, then carefully remove the old filter and dispose of it properly. Insert the new filter, ensuring it fits securely, and close the panel before restarting the air shower. Regular replacement is crucial for maintaining effective filtration.

10. What are the common materials used in air shower construction?

Common materials used in air shower construction include stainless steel, which offers durability and corrosion resistance, and powder-coated steel for added aesthetics. Additionally, some air showers may use polycarbonate or acrylic panels to provide visibility while maintaining strength. These materials are chosen for their ability to uphold cleanliness and withstand harsh environments.

11. How often should I clean my air shower?

It is recommended to clean your air shower at least once a month, or more frequently if it is used in high-traffic areas. Regular cleaning helps prevent the buildup of dust and contaminants, ensuring the air shower operates effectively. Additionally, check and replace filters according to the manufacturer’s guidelines for optimal performance.

12. Are there specific air shower models for cleanroom applications?

Yes, there are specific air shower models designed for cleanroom applications, featuring advanced filtration systems like HEPA or ULPA filters to meet strict contamination control standards. These models often include additional features such as automated controls, adjustable airflow, and enhanced materials to ensure compliance with cleanroom protocols.

These models often feature:

• Advanced filtration systems (HEPA/ULPA)

• Enhanced airflow control

• Materials that comply with

13. What is the importance of air shower pressure?

Air shower pressure is critical as it helps create a sufficient airflow that effectively dislodges and removes contaminants from personnel and equipment. Maintaining the correct pressure ensures that the air shower operates efficiently, providing a barrier against contamination beforeentering controlled environments. Proper pressure also contributes to the uniformity of airflow, which is essential for effective particle removal and maintaining cleanliness standards.

14. How does an air shower contribute to a sterile environment?

An air shower contributes to a sterile environment by using high-velocity air jets to remove contaminants from personnel and equipment before they enter a cleanroom. This process dislodges dust, particulate matter, and microorganisms, significantly reducing the risk of contamination. By creating a controlled airflow, air showers help maintain the strict cleanliness standards required in sensitive environments like laboratories and manufacturing facilities.

15. How long does an air shower cycle last?

The typical cycle duration of an air shower lasts between 10 to 30 seconds, depending on the specific model and settings. This brief period is sufficient to effectively displace contaminants from the user's body and clothing before entering a cleanroom. Some models may offer adjustable cycle times to cater to varying operational needs.

16. Can an air shower help reduce static electricity?

Yes, an air shower can help reduce static electricity, especially when equipped with ionizing blowers. These blowers neutralize static charges on surfaces by emitting positive and negative ions, thereby minimizing the risk of static discharge. This feature is particularly important in environments where static can damage sensitive electronic components or disrupt processes.