• High efficiency filtration

  The main function of liquid tank type high efficiency filters without separators is to provide high efficiency filtration of airborne particles. It has a filtration efficiency of 99.99% to 99.995%@0.3μm Some of the products can even achieve higher filtration efficiencies, such as H14 rating. This is made possible by the combination of ultra-fine glass fiber media and hot-melt separators used to ensure that the filter is fully utilized over its entire depth.

• Low resistance design

  Thanks to the design without separators, the liquid tank filter operates with low resistance, which helps reduce energy consumption and realize energy saving and emission reduction. In addition, the special pleat design and hot-melt separators allow for more even airflow distribution, further reducing operating resistance.

• Large Dust Capacity

  Due to its unique structural design, the tank-type high efficiency filter has a large dust capacity, which means that the filter can capture more dust particles under the same conditions, prolonging the replacement cycle and reducing the frequency of maintenance.

• Easy installation

  Tank-type HEPA filters are very easy to install, usually equipped with flanges or other connectors, and can be directly installed in the existing ventilation system. Meanwhile, its lightweight structure is designed for easy transportation and replacement.

• Good sealing performance

  The sealing around the filter is made of special hermetic sealant, especially the use of liquid trough sealant, which ensures the formation of good sealing effect between the filter and the outer frame, prevents air leakage and ensures the filtration efficiency.

Usage

• Select the appropriate model and specification of liquid tank high-efficiency non-septum filter according to the actual demand.

• Install the filter in the appropriate position according to the guidelines of the installation instructions.

• In the course of use, the integrity and cleanliness of the filter should be checked regularly, and it should be replaced or cleaned in time if it is damaged or contaminated.

• According to the actual situation, carry out regular maintenance and repair to ensure the long-term use effect and safety of the filter.

Maintenance

• Clean the filter regularly to remove the dirt and impurities on the filter to ensure its filtration efficiency.

• Regularly check whether the connection of the filter is loose, cracked or damaged, etc., and repair or replace it in time.

• Avoid overuse of the filter, use the filter according to the instructions and do not exceed its service life.

• When storing the filter, avoid excessive high or low temperature, direct sunlight and humid environment, so as not to affect the service life of the filter.

• Design Features

  The design of liquid tank type high efficiency filter without separator is characterized by its unique structure and excellent filtration effect. Firstly, the filter uses ultra-fine glass fiber filter paper as the filter media and thermoplastic adhesive as the separator, which ensures the filtration efficiency and at the same time reduces the operation cost. Secondly, the spacerless thermoplastic spacer adhesive ensures consistent pleat layer spacing, which optimizes the airflow path and achieves higher dust holding capacity and filtration efficiency. In addition, the filter is sealed around the perimeter with a special sealant, which enhances the overall sealing performance and prevents contaminant leakage. In order to protect the filter media from damage, the inlet and outlet surfaces of the filter are also equipped with a plasticized protective mesh. Finally, the air outlet side of the filter is equipped with a flange, and the inside of the flange is filled with liquid tank sealant to further enhance the sealing performance.

• Material composition and operating conditions

  In terms of materials, the outer frame of the liquid tank type high efficiency filter without partition usually adopts aluminum profile, and the protective mesh is sprayed diamond mesh. The sealing strip usually uses EVA or neoprene rubber, while the separator uses EVA hot melt adhesive. The choice of these materials not only ensures the robustness and stability of the filter, but also provides good sealing and chemical resistance. Under the conditions of use, the filters are able to operate in temperatures of up to 70°C and humidity of up to 80%.

• Technical specifications

  The filtration efficiency class of the liquid tank type high efficiency filter without compartment can reach H13, H14 (EN1822) class,the filtration efficiency of the H13 grade is 99.97-99.99%@0.3μm, and the H14 grade is 99.995-99.999%@0.3μm. Such filtration efficiency is sufficient to deal with most of the particulate pollutants. At the same time, the filter has a very large dust holding capacity, which can effectively extend the service life and reduce the frequency of replacement, thus reducing the operating costs.